Fatigue Life of Single-lap Composite Samples over Tightening Torque of Bolted Joints
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 430
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT06_065
تاریخ نمایه سازی: 31 تیر 1398
چکیده مقاله:
The effects of clamping torque on the fatigue life behavior of single-lap composite bolted joints were examined using experimental and numerical techniques. Fatigue tests were performed on composite samples while torques applied on the bolted joints were 1.5, 3, and 8 N.m. Experimental results demonstrated an increase in fatigue life as high as 4 times with an increase in applied torques. Fatigue life data were drastically improved at high cycle regime particularly in 8 N.m as compared with other applied torques. Higher values of applied torques provoked delamination mode around the holes in composite samples. Fatigue damage progress and failure was analyzed through use of 3-D finite element (FE) method on the basis of the Hashin model. The numerical fatigue life results closely agreed with the experimental life data. FE results further enabled to evaluate damage direction and modes of failure in composite samples.
کلیدواژه ها:
نویسندگان
M FEYZI
M.Sc. Graduate Student, Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran.
S Hassanifard
Associate Professor, Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran.
A Varvani-Farahani,
Professor, Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, Canada.