There phase horizontal separator design using CFD and semi-empirical model
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 712
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
DSCONF02_193
تاریخ نمایه سازی: 21 شهریور 1395
چکیده مقاله:
In order to design a three phase horizontal separator a combination of CFD method and semi-empirical model was used. Two semi-empirical procedures, Arnold and Stewart 2008 and Monnery and Svrcek 1994 were conducted to develop separator dimensions. A Computational Fluid Dynamic (CFD) method was used to investigate flow behavior and separator performance. In this work a combination of Volume of Fluid (VOF) and k-ε turbulence model were implemented. The results of numerical calculation in term of three phase velocity, density and the turbulent kinetic energy were analyzed. This outputs obviously demonstrated that the Arnold and Stewart semi-empirical procedures is more suitable for designing the dimension of the horizontal there phase separator.
کلیدواژه ها:
Computational Fluid Dynamic ، three phase horizontal separator ، separation performance ، Volume of Fluid (VOF) ، k-ε turbulence model
نویسندگان
Ahmadreza Ghaffarkhah
MSc student of petroleum department of Amirkabir University of Technology
Zahra Azimi
MSc student of petroleum department of Tarbiat Modares University of Technology
Mohammad Sabah
Assistant professor of petroleum department of Amirkabir University of Technology
Mohamadjavad Ameri Shahrabi
Associate professor of chemical engineering department of Amirkabir University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :