Voltage and reactive power control in a distribution system using hybrid SA-DBPSO algorithm
محل انتشار: بیستمین کنفرانس توزیع برق
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 755
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
EPDC20_170
تاریخ نمایه سازی: 1 مهر 1394
چکیده مقاله:
Voltage and reactive power control in distribution systems includes the control of devices such as tap changer, shunt capacitor and feeder capacitors. The main objectives of this problem are defined as minimizing the power loss, reducing the reactive power transfer of the substation transformer and improving of the voltage profile. Control variables include the state of capacitors positions and main transformer under load tap changer position. Furthermore, by changing the capacitors locations in the network per year, the methods are improved in this paper. In order to solve the optimization problem, simulated annealing algorithm is used to replace the capacitors, and discrete binary particle swarm optimization algorithm is implemented to solve volt/var problem in any replacement. To demonstrate the effectiveness of this method, the IEEE 69 bus distribution test system, including one new shunt capacitor and ten existing feeder capacitors in some installable feeders is used.
کلیدواژه ها:
نویسندگان
Abdolhamid Rahideh
Department of Electronics and Electrical Engineering Shiraz University of Technology, Shiraz, Iran
Mohsen Gitizadeh
Department of Electronics and Electrical Engineering Shiraz University of Technology, Shiraz, Iran
Ali Sadradeh
Research and standard office, Fars Regional Electric Company, Shiraz, Iran