Effects of Geometrical Parameters on Exergy of Cold Water Storage Tanks
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,198
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
HVAC02_011
تاریخ نمایه سازی: 25 تیر 1393
چکیده مقاله:
Thermal stratification is applied in the field of energy storage to augment efficiency of energy use. Research on energy storages has revealed that the thermal performance or energy saving of a water storage tank can be increased by maximizing the level of thermalstratification within the storage tank. In this paper, impacts of geometrical parameters of tanks on the thermal stratification within a cold storage tank are analyzed. Seven two-dimensional models have been numerically simulated by using the computational fluiddynamics program, Fluent, with realistic boundary and initial conditions applied. The level of thermal stratification in each model has been quantified using exergy analyses. The results show increasing the tanks aspect ratio of height to width, decreasing inlet/outletdiameter, and moving the inlet/outlet position to the outer extremities of the tank all result in increasing levels of thermal stratification.
کلیدواژه ها:
نویسندگان
Moien Farmahini
Department of Mechanical Engineering, Tarbiat Modares University
Ghassem Heidarinejad
Department of Mechanical Engineering, Tarbiat Modares University
Mehdi Maerefat
Department of Mechanical Engineering, Tarbiat Modares University
Shahram Delfani
Building and Housing Research Center (BHRC), Building Installations Department
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :