Effect of anodizing of recycled aluminum alloy in sulfuric acid electrolyte on wetting of Nano-silica top coat

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 569

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCC06_035

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

of sol-gel method for metallic surface pretreatment is a relatively new approach in surface engineering and corrosion protection. The present article reports a simple and convenient method for preparing a surface based on nano-silica coating. The significance of anodizing pretreatment for roughing the surface and creating a low surface energy for better bonding of silica top coat with Al substrate will be pointed. Here, Silica coating was prepared by sol-gel method. Samples were dipped in sol after anodizing process. The coating sol was prepared by keeping the constant molar ratio of Tetraethoxysilane (TEOS), Ethanol (C2H6O), water (H2O) and (HNO3) (0.1 M) as catalyst. Morphology of coated surface were characterized by scanning electron microscopy (SEM) and, wettability of silica coats were characterized by static contact angle measurements. SEM and EDX investigations on the surface of the anodized and silica coated sample showed that the silica film formed in the pores and the rough surface becomes smooth and uniform. Consequently, static water contact angel decreases.

کلیدواژه ها:

Anodizing- Nano-Silica Sol – gel coating- wettability- contact angle

نویسندگان

B. Javanpour

Department of Material Engineering, Sahand University of Technology, Tabriz, Iran.

M. Ahmadi

Department of Material Engineering, Sahand University of Technology, Tabriz, Iran.

M. Azadbeh

Department of Material Engineering, Sahand University of Technology, Tabriz, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Vinayak V. G., Uzma K.H. B., Sanjay S. L, Satish ...
  • Shanhu L., Xiaojing L, Sanjay S. L., Li G., Seongpil ...
  • coatings through simple sol-gel processing of fluoro alkylsilane _ _ ...
  • نمایش کامل مراجع