Toughening of Epoxy Resin through Blending with Furan Resin

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 521

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCC06_057

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

A method to toughen epoxy resin by furan resin is presented in this work. First, poly(furfuryl alcholol) resin was synthesized, then, epoxy resin was mixed by various amount of the furan resin and they were cured by diethylene thiamine (DETA). Curing bo th of resins were happened by the amine hardner. While both of the initial resins were brittle, they were converted to highly to ughen thermosetting materials after curing. Fracture toughness and flexural tests were performed for toughening effects furan resin loading on epoxy matrix. Clearly, fracture toughness of epoxy resin in terms of critical-stress-intensity factor, KIC that increased 60%, comparison to neat epoxy. The results of flexural tests showed that entering furan resin into epoxy networks can to ughen the epoxy without sacrifice its flexural strength and modulus. This data confirmed the fracture toughness results.

نویسندگان

S. Mohajeri

Adhesive and Resin Department, Polymer and Petrochemical Institute

M.J. Zohuriaan-Mehr

Adhesive and Resin Department, Polymer and Petrochemical Institute

S. Pazokifard

Color and Surface Coatings Department, Polymer and Petrochemical Institute

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • (1) Bagheri, R., Marouf B.T., Pearson R.A., Polymer, 49, 201-225, ...
  • (2) Hodgkin J.H., Simon G.P., Varley R.J Polym. Adv. Technol ...
  • (3) Wang K., Chen L, Wu J., Toh M.L., He ...
  • (4) Shuying Wu, Qipeng Guo, Macromol ecules _ 45, 3829-3840, ...
  • نمایش کامل مراجع