Synthesis and characterization of ionomer-based waterborne polyurethane- investigating mechanical and thermal parameters

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 506

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCC06_089

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

In this study, waterborne polyurethane dispersion was synthesized by polyaddition reaction using polyester polyol and toluene diisocyanate in presence of dibutyltin dilaurate (DBTDL) as catalyst. The crosslinking was created between waterborne polyurethane chains to improve rheological, thermal and mechanical properties by the corporation of 1,4 butandiol and hexamethylene diisocyanate (HDI) as chain extender and crosslinking agents. Several properties of crosslinked waterborne polyurethane were measured by particle size distribution, Gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Dynamic mechanical Thermal Analysis (DMTA) and strength testing. Many parameters were investigated such as ratio of NCO:OH, molar ratio of DMPA, BDO, TEA and amount of rate of water addition. Different qualitative tests were firstly performed, then supplementary tests was done at best sample.

کلیدواژه ها:

Waterborne polyurethane- Polyaddition process- Chain extender- Dynamic mechanical thermal

نویسندگان

M. Pilehkouhi

Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran.- Color and Polymer Research Center, Amirkabir University of Technology, Tehran, Iran

A. Khosravi

Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran.

M. Khorasani

Color and Polymer Research Center, Amirkabir University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Hu XH, Zhang XY, Dai JB and Liu J, J ...
  • K. Kojio, Y. Mitsui, M. Furukawa, Synthesis and properties of ...
  • Kalele Mulonda hercule, Zhu Yan, Mulenga Mbombo Christophe, International Journal ...
  • I. Zargar lellahi1, M. Khorasani2, A. A. Sabbagh Alvani2, S. ...
  • ASTM Standard ASTM D2572-97, Standard Tes Method for Isocyanate Groups ...
  • نمایش کامل مراجع