Fabrication of hollow and non-hollow SiO2 nanofibers: investigation of production conditions and the dye removal ability

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 492

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCC06_100

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

In this work, SiO2 hollow (HNF) and non-hollow (nHNF) nanofiber in long and continuous form were successfully fabricated by combining of electrospinning, sol-gel and thermal decomposition methods and the optimum production condition was determined. The thermal process was occurred at two different temperatures (530º and 1030º C). The synthesized nanofibers were characterized by FTIR, XRD, BET and SEM analyses. Results showed that HNF has higher weight loss and BET surface area in compared to the nHNF. It was concluded that the temperature applied in thermal decomposition process had a direct influence on properties of synthesized nanofiber. The dye removal ability of synthesized nanofibers was comprised. Moreover, the effect of operational parameters on dye removal process including adsorption dosage, pH and dye concentration was studied. It was found that the adsorption capacities of HNF and nHNF were higher than conventional synthesized silica.

کلیدواژه ها:

Electrospinning technique- Sol-gel- Thermal decomposition-HNF-nHNF- Dye removal- Adsorption

نویسندگان

A. Almasian

Department of Environmental Research, Institute for Color Science and Technology, Tehran, Iran

Gh. Chizari Fard

Department of Textile, Yazd Branch, Islamic Azad University, Yazd, Iran

M. Mirjalili

Department of Textile, Yazd Branch, Islamic Azad University, Yazd, Iran

F. Najafi

Department of Resins Research, Institute for Color Science and Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • A. Almasian, M. E. Olya, N. M. Mahmoodi, J TAIW ...
  • A. Almasiana, Gh. Chizari Fardb, M. Parvinzadeh Gashtic, M. Mirjalilid ...
  • نمایش کامل مراجع