Evaluation of surface properties of stainless steel brackets coated with Ti and Ag by the PVD method
محل انتشار: ششمین کنگره بین المللی رنگ و پوشش
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 432
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCC06_158
تاریخ نمایه سازی: 25 بهمن 1394
چکیده مقاله:
To evaluate the effectiveness of Ti and Ag coating on stainless steel orthodontic brackets this study was conducted. 75 stainless steel orthodontic bracket were divided into five groups of 15 samples each. The first group was left uncoated as control group. PVD coating method was used in this experiment. Two groups of 15 brackets were Ag-coated with 60nm an 100nm thickness each. The remaining 2 groups were Ti-coated with again 60nm and 100nm thickness each. To evaluate the surface properties 3 samples were selected from each group randomly, and were put to friction test. For surface morphology evaluation, SEM and AFM were used on 1 sample selected from each group. The friction test indicates that, coating increases the friction force. Furthermore by increasing the coating thickness , a greater increase in friction force was observes , regardless of the type of coating. AFM test indicated that , by increasing the thickness of the coating layers, grain size and surface roughness were reduced. Furthermore , SEM test revealed that coating either with Ti or Ag results into less pores in relevance to uncoated samples. The SEM results proved that by increasing the coating thickness , grain size was reduced.
کلیدواژه ها:
Nano particles- Coating- PVD method- Surface properties- Stainless steel brackets
نویسندگان
A. Pourzare
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
S.M. Rabii
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :