The investigation on the relation between curing condition and mechanical properties of two part epoxy resins

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 415

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCC06_304

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

The main objective of this project is investigation relation between extent of cure and mechanical properties of the curedresins. In the first step, The effect of curing agent, hardener/resin mixed ratio, temperature, relative humidity and time on crosslinking degree has been investigated. The direct method for determination crosslinking degree is carried out by extracting residual diglycidyl ether bisphenol A (DGEBA), TETA and Epikure F205 from final product. Epoxy resin that cured with TETA had higher crosslinking degree than Epoxy cured with Epikure F205. Temperature had higher effect on crosslinking degree. In the second part, The effect of temperature on mechanical properties has been examined. higher Impact strenght, Tensile and hardnes properties were obtained for two component epoxy that cured in 30 0C. Furthermore, Epoxy resin that cured with Epikure F205 had higher mechanical properties than Epoxy cured with TETA.

کلیدواژه ها:

Epoxy- Curing- Crosslinking degree- Mechanical properties

نویسندگان

A. Mirmohseni

Department of Applied Chemistry, Faculty of Chemistry, Tabriz University, Iran

S. Ayami

Department of Applied Chemistry, Faculty of Chemistry, Tabriz University, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Kendig M., Hon M., Electroche. Solid-State Lett, 8, B10-B11, 200)8. ...
  • Buchheit RG., Guan H., Mahajnam S., Wong F., Prog. Org. ...
  • ASTM, D2765-01., Standard Test Methods for D etermination of Gel ...
  • نمایش کامل مراجع