EFFECT OF POLYPROPYLENE FIBERS ON MECHANICAL AND PHYSICAL PROPERTIES OF MORTARS CONTAINING NANO-SIO2

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,944

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCD03_119

تاریخ نمایه سازی: 20 مهر 1387

چکیده مقاله:

It has been demonstrated that the fiber-matrix bond strongly affects the ability of fibers to stabilize crack propagation in the matrix. As the bond between fiber and matrix is mainly mechanical, it seems that incorporating nano-SiO2 (NS) into fiber reinforced cement composites provides better bond with matrix through pore refinement and better distribution of the hydrated products. Hence in this paper an effort was made to study the effect of polypropylene (PP) fibers on mechanical properties and shrinkage of mortar incorporating NS. Three fiber volume fractions, 0.1%, 0.3% and 0.5% were considered. Compressive and flexural strength, water absorption and shrinkage of mortars were reported. Results showed that NS improved mechanical and water absorption characteristics of mortars significantly. It has been observed that the addition of NS fairly enhanced the fibers effectiveness in improving the mechanical strength of mortars.

نویسندگان

Sadrmomtazi

Assistant Professor, Dept. of Civil Engg, Faculty of Engg, University of Guilan, Rasht, Iran

A Fasihi

M.S. Student, Dept. of Civil Engg, Faculty of Engg, University of Guilan, Rasht, Iran

A.K Haghi

rofessor, Dept of Textile Engg, Faculty of Engg, University of Guilan, Rasht, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • ه» _ _ Method _ of Low-Rise.. Concrete Research, 1999, ...
  • Toutanji H.A., Properties of pO lypropylene fiber reinforced silica fume ...
  • Linfa Y., Pendleton R.L., Jenkins C.H.M., Interface morphologies in polyolefin ...
  • Holmer S.J., Vahan A., Transition ZOne studies of vegetable fiber-cement ...
  • ASTM C-778, Standard specification for standard sand, Annual book of ...
  • ASTM C-109, Standard test method for compressive strength of hydraulic ...
  • Li H., Xiao H.G., Yuan J., Ou J.P., Micro structure ...
  • Gao J.M., Qian C.X., Wang B., Morino K., Experimental study ...
  • RAO G.A., Investigations On the performance of silica fume- incorporated ...
  • JI T., Preliminary study on the water permeability and micro ...
  • Song P.S., Hwang S., Sheu B.C., Strength properties of nylon-and ...
  • Benachour Y., Davy C.A., Skoczylas F., Houari H., Effect of ...
  • Toutanji H., Mcneil S., BAYASI Z., Chloride permeability and impact ...
  • RAO G.A., Long-term drying shrinkage _ mortar- influence of silica ...
  • نمایش کامل مراجع