Porosity of Lightweight Fly Ash Agregates with Different Binders and Heat Treatments
محل انتشار: هشتمین کنگره بین المللی مهندسی عمران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,214
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE08_696
تاریخ نمایه سازی: 28 آبان 1387
چکیده مقاله:
In this study, coal fly ash was tested and the sintering process of this material was aimed at manufacturing sintered products for use as concrete aggregates. Addition of different binders such as bentonite and glass powder was attempted to improve the chemical and mechanical characteristics of sintered products. Influence of different sintering binders such as bentonite and glass powder and temperatures on the roperties of ceramic materials was reported. It is concluded that the porosity of fly ash changed with the binder types, content and different temperatures.
کلیدواژه ها:
نویسندگان
Niyazi Ugur Kockal
Dr., Akdeniz University Department of Civil Engineering Dumlupinar Bulvari, Antalya, Turkey
Turan Ozturan
Professor, Bogazici University Department of Civil Engineering Bebek, Istanbul, Turkey
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :