Performance of Ti promoted Ni/FSM-16 in CO2 Reforming of Methane
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 625
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCNRT01_101
تاریخ نمایه سازی: 30 دی 1397
چکیده مقاله:
In this investigation, the Performances of synthesized FSM-16 supported Nickle catalysts Ni-including FSM-16 and Ni-Ti-FSM-16 in Dry Reforming of Methane (DRM) were compared.The analysis of X-ray diffraction (XRD) and N2 adsorption/desorption isotherms have been employedfor the fresh prepared catalysts. Dry reforming of methane has been carried out at different temperatures of 750, 800 and 850 °C and atmospheric pressure in a fixed bed quartz reactor.Ni-Ti-FSM-16 showed superior performance in DRM reaction, leading to CH4 conversion of 70%, CO2 conversion of 69% with H2/CO ratio of about 0.78 at 850 oC after 150 min of reaction
کلیدواژه ها:
نویسندگان
Rezvan Rafieenezhad
Department of Chemical Engineering, Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr, Iran
Ali Izadbakhsh
Department of Chemical Engineering, Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr, Iran
Ali Mohammad Sanati
Department of Environment, Persian Gulf Research Institute, Persian Gulf University, Bushehr, Iran
Farshad Gholizadeh
Department of Chemical Engineering, Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr, Iran