Optimization of Cr (VI) removal from contaminated waters using chitosan adsorbent, by Response Surface Methodology
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,342
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICECS01_043
تاریخ نمایه سازی: 23 خرداد 1392
چکیده مقاله:
Application of chemometric methods, like response surface methodology (RSM), for designing the experiments is growing rapidly in different science such as chemical engineering, analytical chemistry and environmental chemistry. In this study, application of response surface methodology for Cr (VI) removal from aqueous solutions by the use of biodegradable chitosan polymer has been studied. Minitab 14 software was used for designing the experiments and investigating the influence of effective parameters on the reaction. The model have a good correlation coefficient (R2=0.95) and optimum condition of the Cr (VI) removal process for chitosan concentration, initial concentration of Cr (VI), pH and reaction time were achieved 2200 mg/L, 10 mg/L, 4 and 120 min, respectively. Investigations and results show that response surface methodology with central composite design is an efficient method for experiment designing and optimizing Cr (VI) removal reaction by chitosan polymer
کلیدواژه ها:
نویسندگان
Narges Nozad
Water Quality Laboratory, Ahar Water & Waste water Co., Iran
Orang Valinezhad
Department of organic chemistry, Payame Noor University of Zanjan, Iran
Mir Jafar Tizmaghz
Management, water & waste water Company of Ahar
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :