Thermodynamic Equilibrium Calculations of LPDME Process from Synthesis gas
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,626
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_397
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
Thermodynamic analysis of single-step synthesis of dimethyl ether (DME) from syngas over a bi- functional catalyst in a slurry bed reactor have been investigated as a function of temperature (200–240 ◦C), Pressure (20-50 bar) and composition of feed ratio (H2/CO: 1–2). The bi-functional catalyst was prepared by physical mixing of CuO/ZnO/Al2O3 as a methanol synthesis catalyst and H-ZSM-5 as a methanol dehydration catalyst. The three reactions including methanol synthesis from CO and H2, methanol dehydration to dimethyl ether (DME) and water-gas shift reaction were chosen as the independent reactions. Thermodynamic equilibrium constants of these reactions and equilibrium composition of all components were determined from experimental and theoretical calculations. Moreover, the effect of reaction temperature, pressure and H2/CO ratio in feed at equilibrium conditions were predicted by thermodynamic model.
کلیدواژه ها:
نویسندگان
Moradi
Department of chemical engineering, Faculty of engineering, Razi University, , Kermanshah, Iran
Ahmadpour
Department of chemical engineering, Faculty of engineering, Razi University, , Kermanshah, Iran
Yaripour
Catalysis Research Group, Arak Center of Petrochemical Research & Technology Co., National Petrochemical Company (NPC), Arak, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :