One-dimensional heterogeneous plug flow model was employed to model an adiabatic fixed bed reactor
محل انتشار: ششمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,804
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC06_337
تاریخ نمایه سازی: 1 مهر 1388
چکیده مقاله:
One-dimensional heterogeneous plug flow model was employed to model an adiabatic fixed bed reactor for the catalytic ndehydration of methanol to dimethyl ether. Longitudinal temperature and conversion profiles predicted by this model were compared to those experimentally measured in a bench scale reactor. The reactor was packed with 1.5-mm γ- Al2O3 pellets as dehydration catalyst and operated in a temperature range of 543-603 K at an atmospheric pressure. Also, the effects of weight hourly space velocity (WHSV) and temperature on methanol conversion were investigated. According to the obtained results, the maximum conversion is obtained at T=603.15 K and WHSV=72.87 h-1.
کلیدواژه ها:
نویسندگان
M. Fazlollahnejad
Department of Chemical Engineering, Babol University of Technology, P.O. Box ۴۸۴, ۴۷۱۴۸۷۱۱۶۷ Babol, Iran
M Taghizadeh
Department of Chemical Engineering, Babol University of Technology, P.O. Box ۴۸۴, ۴۷۱۴۸۷۱۱۶۷ Babol, Iran
A Eliassi
Chemical Industries Research Department, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran
G Bakeri
Catalyst Research Group, Petrochemical Research and Technology Company, National Petrochemical Company, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :