Effects of Synthesis Parameters on Mullite Microfiltration Membranes: Structure and Performance
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 598
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_752
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
In this study, effects of calcination temperature, hydraulic pressure and alumina content on permeation flux and porosity of microfiltration (MF) membranes were evaluated. To complete mullite phase formation, α-alumina was added to kaolin. CMC (Carboxymethyl Cellulose) was also used to increase porosity and permeation flux of the membranes. Many experiments should be carried out to understand effects of different parameters. Logical selection of the experiments cansave time and money. To obtain the meaningful results, full factorial method was used. The MF membranes were successfully made of 40% alumina, at pressure of 300 bar and were calcined at temperature of 1150 °C. Water permeation flux and porosity of these membranes were evaluated as 58.3 kg/m2.h and 34.5%, respectively
کلیدواژه ها:
نویسندگان
Arash Bayat
Research Lab for Separation Processes, Faculty of Chemical Engineering, Iran University of Science and Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :