Extraction of a Model in order to Prevent Wrinkling and Tearing of Oil Pipes during Bending Process using Finite Element Method
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 393
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICMAES01_038
تاریخ نمایه سازی: 30 دی 1397
چکیده مقاله:
In each process, determination of acceptable operational ranges and optimizing them to prevent flaws and redundant corrective processes is of the utmost importance. In this study, we take bending conditions on oil pipes into consideration to enhance bending quality in terms of wrinkling and tearing occurrences. Parameters optimized in Finite Element Method analysis are bending angle and radius. Sorting combinations of them on the basis of the resultant stress contour would be a perfect reference to become aware of prior process conditions as well. The reason why such an analysis has been done is a plan to decrease periodical inspections in mentioned regions of oil pipes and finally alleged by results the bending angles over 450 have less impact on stress values.
کلیدواژه ها:
نویسندگان
Kamran Ranjbar
Department of industrial engineering Malek Ashtar University of Technology Tehran, Iran
Parham Rostami
Department of mechanical engineering University of Tehran Tehran, Iran