Enhancement of Ultrasonic Bscan Images for Sizing of Defects by Time-of-Flight Diffraction
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,424
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_089
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
A signal processing technique is presented for significantly sharpening the resolution of ultrasonic B-scan images, similar to those acquired in the nondestructive evaluation of girth welds in oil/gas pipelines. This enhancement allows a much improved estimate of the exact size of any detected anomaly in the weld, such that fracture mechanics can be used to gauge the probability of weld failure. The algorithm is based on the synthetic aperture focusing technique (SAFT), combined with a variation of Weiner filtering and autoregressive spectral extrapolation. An analytical model of the transducer is used to construct an appropriate reference spectrum for the deconvolution operation, and accounts for the dependence of a beam’s frequency spectrum on the position of a flaw relative to the transmitter.Simple experimental results are used to provide an estimate of the improvement in flaw sizing accuracy.
کلیدواژه ها:
نویسندگان
A.N Sinclair
Professor and chair, Mechanical and Industrial Engineering, University of Toronto
J.G Fortin
Master’s student, Mechanical and Industrial Engineering, University of Toronto
F Honarvar
Associate Professor, Mechanical Engineering, K.N. Toosi University of Technology, Tehran
M Jastrzebski
Master’s student, Mechanical and Industrial Engineering, University of Toronto
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :