Wind Tunnel Aerodynamic Coefficients Evaluation of RP Models based on Layer’s Thickness Affect
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,541
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_043
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
Nowadays, rapid prototyping (RP) methods are widely used to produce wind tunnel testing models where layer thickness is important parameter that affects aerodynamic characteristics of such wind tunnel models. This paper describes the affects of layer thickness on aerodynamic coefficients for constructed wind tunnel testing of models produced via rapid prototyping technology. Three models were evaluated, where these models were fabricated from ABSi by fused deposition method (FDM). The layer thickness applied, was 0.178mm, 0.254mm and 0.33mm. The surface roughnesses for each model were respectively 25μm, 63μm and 160μm (RZ) that was determined by PERTHOMETER2. A wing-body-tail configuration was chosen for the actual study. Testing covered the Mach range of Mach 0.3 to Mach 1.2 at an angle-of-attack range of -4° to +16° at zero sideslip. Coefficients of normal force, axial force, pitching moment, and lift over drag are shown at each of these mach numbers. Results from this study show that layer thickness does have effect on the aerodynamic characteristics: in general the data differ between the three models by fewer than 6%. The layer thickness does have more effect on the aerodynamic characteristics when mach number is decreased and had most effect on the aerodynamic characteristics of axial force and its derivative coefficients.
کلیدواژه ها:
نویسندگان
S DANESHMAND
lecturer Mechanical Engineering Department Islamic Azad University Majlessi Beranch, Isfahan, Iran
S RAHMATI
assistant Professor
R ADELNIA
lecturer
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :