High Speed Turning of H-13 Tool Steel using Ceramics and PCBN
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,226
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_050
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
H-13 is the toughest tool steel used in machined die casting and forging dies. Due to its extreme hardness and poor thermal conductivity high speed cutting results in high temperature and stresses. This gives rise to surface damage of the workpiece and accelerated tool wear. This study evaluates the performance of different tools including ceramics and PCBN using practical finite element simulations and high speed orthogonal cutting tests. The machinability of H-13 was evaluated by tool wear, surface roughness and cutting force measurements. From the 2D finite element model for orthogonal cutting, stresses and temperature distributions were predicted and compared for the different tool materials.
کلیدواژه ها:
نویسندگان
U Umer
Assistant Professor Engineering Sciences Department, Pakistan Navy Engg. College,National University of Sciences and Technology, Karachi, Pakistan
S.N .Danish
Assistant Professor, National University of Sciences and Technology (NUST), Pakistan
S.J Askari
Assistant Professor, National University of Sciences and Technology (NUST), Pakistan
S.I Butt
Assistant Professor, National University of Sciences and Technology (NUST), Pakistan
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :