Visualization of Talc Amount Effect on Expansion Behaviour of HMS PP Extruded Foam
محل انتشار: نهمین کنفرانس مهندسی ساخت و تولید
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,686
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME09_049
تاریخ نمایه سازی: 5 آبان 1388
چکیده مقاله:
Remarkable functional characteristics and low material costs of polypropylene (PP) foams have rendered them as a promising substitute for other thermoplastic foams in industrial applications.This paper investigates the effect of nucleating agent (talc) on expansion behaviours of non-crosslinked high-melt-strength (HMS) polypropylene (PP) foamed using supercritical carbon dioxide (CO2). A charge coupling device (CCD) camera was installed at the die exit to carefully monitor the shape of the extruded polypropylene foam. The expansion behaviour of HMS PP was observed and visualized by using varying amounts of talc. Different die geometries which are related to die pressure and pressure drop rate and varying amounts of CO2 is also used in experiments. Experimental results indicated that talc content did not play an important role to enhance the expansion ratio of the foamed sample. Results also indicated that the expansion ratios of PP foams exhibited mountain-shaped curves. This demonstrated the existence of an optimum temperature range for maximum expansion. However, the typical mountain-shaped expansion curves were not observed for some cases.
کلیدواژه ها:
نویسندگان
T Azdast
Assistant Professor ۱Corresponding Author Address: Manufacturing Engineering Group, Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
C.B. Park
Full Professor of Department of Mechanical and Industrial Engineering, University of Toronto, Canada
A.H Behravesh
Associate Professor of Mechanical Engineering Department, Tarbiat Modares University, Tehran, Iran
E. K Lee
PhD Student of Department of Materials Science and Engineering, University of Toronto, Toronto, Canada
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :