Numerical and experimental evaluation of bending test of friction stir welded of brass alloy

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,643

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME10_371

تاریخ نمایه سازی: 29 آبان 1388

چکیده مقاله:

In this paper, the standard bending test of friction stir welded thin plate of brass analyzes by finite element method. It is demonstrated to have voids due stirrer pin and established that theirs distribution is linear in thin plate weld. By considering experiments results in tensile standard test, the linearity of distribution agreed successfully. The mechanical properties of weld metal achieved by conducting standard tensile test and. Also, the stress concentration accurse in TMAZ-SZ limit of weld and this is fully establishes in tensile test of thin plate of brass welds by FSW.

کلیدواژه ها:

Friction stir welding (FSW)- Bending test- Void distribution- Tensile test- stress concentration

نویسندگان

M Mousavi Mashhadi

Professor, Faculty of Mechanical Engineering, Tehran University

N Sadeghian

Ph.D. Student, Faculty of Mechanical Engineering, University of Tehran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Thomas WM, et al. "Friction Stir Butt Welding", International Patent ...
  • Mishra R.S., Ma Z. Y. "Friction stir welding and processing". ...
  • C. Meran "The joint properties of brass plates by friction ...
  • M. K. Besharati Givi, N. Sadeghian, M. Hajikaram, "Friction stir ...
  • ASTM E8-04: Standard Test Methods for Tension Testing of Metallic ...
  • ASTM E1 90-92(1997): Standard Test Method for Guided Bend Test ...
  • نمایش کامل مراجع