Design and Fabrication of Micro Droplet Generator

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,311

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME12_001

تاریخ نمایه سازی: 25 شهریور 1392

چکیده مقاله:

Micro-droplet formation for drop-on-demand (DOD) has many applications such as ink-jet printing, rapid prototyping, and metal powder producing. In this paper design and fabrication of micro droplet printing actuator using piezoelectric excitation is presented. Piezoelectric vibration is used to push liquid out of nozzle and produce droplets. Effect of voltage amplitude, suction and pressure time and nozzle diameter on droplet diameter is investigated. Also, effect of voltage amplitude on droplet velocity and cut off length is described. Presented results can be used to control droplet properties. High speed camera is used to evaluate droplet diameter and velocity. High speed camera pictures are processed with MATLABR2008a. It is possible to control droplet diameter from 450 to 1000 micron with presented actuator. Velocity of droplet can be also controlled in range of about 0.2 to 1.4 m/s. At last, for testing repeatability, ink printing on paper attached to rotary table is done.

نویسندگان

H Sadeghian

Metrology lab, Mechanical Department, Tarbiat Modares University, Tehran, Iran

Y Hojjat

Metrology lab, Mechanical Department, Tarbiat Modares University, Tehran, Iran

M Ghodsi

Metrology lab, Mechanical Department, Tarbiat Modares University, Tehran, Iran

M Sheikhaleslami

Metrology lab, Mechanical Department, Tarbiat Modares University, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Herman Wijshoff, "Dynamica van constructies en vloeistoffen in piezo inkjet ...
  • Yao Yingxue, Gao Shengdong, Cui Chengsong, "Rapid prototyping based on ...
  • Qingbin Liu, Melissa Orme, "High precision solder printing technology and ...
  • Frank G. Zaugg and Peter Wagner, "Drop-on- Demand Printing of ...
  • Kyoungtae Kim, Byung Uk Lee, Gi Byung Hwang, Jun Hyun ...
  • Kuang-Chao Fana, Jhih-Yuan Chena, Ching- HuaWanga, Wen-Chueh Pan, "Development of ...
  • Jung-Hoon Chun, Christian H.Passow, "Droplet Base M anufacturing", Jung-Hoon Chun, ...
  • E.Q. Li, Q.Xua, J.Suna, J.Y.H.Fuha, Y.S.Wonga, S .T _ Thoroddsena, ...
  • نمایش کامل مراجع