Friction Stir Welding of 7075 Aluminum Alloy Rolled Plate
محل انتشار: دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 959
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME12_073
تاریخ نمایه سازی: 25 شهریور 1392
چکیده مقاله:
FSW has been successfully used to weld similar and dissimilar cast and wrought aluminum alloys, especially for aircraft aluminum alloys generally present low weldability by traditional fusion welding process. This paper focuses on the microstructural and mechanical properties of the friction stir welding (FSW) of 7075 aluminum rolled plate. The tool for welding was rotated at speeds ranging from 710 to 1500 rpm under various traverse speeds. Macrostructural analysis was performed to check the weld quality (defective or defect free). Cross-sectioning of the welds for metallographic analysis in planes perpendicular to the welding direction and parallel to the weld crown was also performed. The mechanical properties of the weld were determined using a combination of conventional hardness and tensile testing, from this investigation it was found that according to microstructural and mechanical properties of samples, weld joint with high quality was formed.
کلیدواژه ها:
نویسندگان
R Abdi
Department of Mechanical Engineering, Urmia University of Technology, Urmia, Iran
P M.Keshtiban
Department of Mechanical Engineering, Urmia University of Technology, Urmia, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :