Effect of TaC And VC On Microstructure And Mechanical Properties Of WC-10Co Nanocomposite
محل انتشار: دومین کنگره بین المللی علوم و فناوری نانو
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,033
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN02_254
تاریخ نمایه سازی: 27 شهریور 1391
چکیده مقاله:
Tungsten Carbide-Cobalt hard materials (WC-Co) are widely used for a variety of machining, cutting, drilling and other applications [1]. The decrease of grain size of tungsten carbide to nanometer scale increases the strength and toughness simultaneously [2]. Certain carbides such as TaC, VC, Cr3C2 and TiC are often added to inhibit grain growth during sintering [3]. The final microstructure, in turn, depends on the type of sintering process adopted and the sintering parameters such as temperature, time, pressure and atmosphere [4]. In this study, the influence of a small amount of TaC and VC on structural and mechanical properties of sintered samples have been investigated
نویسندگان
M Mahmoodan
Islamic Azad University-Saveh Centre, Saveh, Iran
H Aliakbarzadeh
Maham Research Centre, P.O. Box: ۱۶۶۸۹۱۸۴۷۹ -Tehran, Iran
R Gholamipour
Iranian Research Organization for Science and Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :