Properties of the nanostructured 6061 aluminum alloy produced by melt spinning
محل انتشار: دومین کنگره بین المللی علوم و فناوری نانو
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 948
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN02_493
تاریخ نمایه سازی: 27 شهریور 1391
چکیده مقاله:
In the present study, the properties of nanostructure Al6061, produced by melt spinning technique at a cooling rate of about 107 K/s (resulting in a solidification time of only a few ms), were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), x-ray diffraction pattern (XRD) and microhardness testing. The properties of melt-spun nanostructure were then compared with those of conventional direct chill (DC) casting.The results show that the formation of nanoparticles of Mg2Si (about 50 nm in radius), the nanograins of about 61.8 nm can significantly increase the mechanical properties of melt-spun foils comparing to the conventional cast ones
نویسندگان
k Dehghani
Dept. of Mining and Metallurgical Eng., Amirkabir Univ. of Tech., Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :