Thermal Performance of Heat Exchanger with Turbulent Heat Flow as a Gas Boiler Modeling
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 366
فایل این مقاله در 8 صفحه با فرمت PDF و WORD قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICOCS03_088
تاریخ نمایه سازی: 31 خرداد 1399
چکیده مقاله:
In this paper, a design of a heat exchanger that can be used as a gas boiler investigated. The heat transfer is done with a combination of convection and radiation plus blowing. The equations solved by using the finite volume method (FIM) and the numerical results are compared with experimental data. The effects of the geometric parameters include cold channel width, hot channel width, air intake gaps considered, and thermal performance, dimensionless temperature differences, and heat transfer of flow are studied with Ansys Fluent software. The results show that there is a backflow of combustion products out of the air slots, and the pressure of combustion products increased in the channel. Additionally, the size of the fresh air must be about 3mm to provide fresh air to complete combustion and creating enough space between the higher flames and the combustion products of the low flames.
کلیدواژه ها:
نویسندگان
S. Hoseinzadeh,
Centre for Asset Integrity Management, Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, South Africa
P. S. Heyns
Centre for Asset Integrity Management, Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, South Africa