The Effect of Production Flow Rate and Gas Injection on Gas Condensate in Fracture Reservoir in Iran

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,304

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICOGPP01_452

تاریخ نمایه سازی: 22 مرداد 1391

چکیده مقاله:

There are three types of gas reservoir: 1-Dry gas 2-Wet gas 3-Gas condensate. The temperature in gas condensate reservoir is between the criticaltemperature and cricondenterm. When the reservoir pressure goes below the dew point pressure, due to reverse condensation in reservoir, gas becomes liquid. These condensateare excessively being used in industry, if stay in the reservoir not only the condensate runs to waste, but also it decrease relative gas permeability near the wellbore, so that it will be decrease the well production. The changes in the flow rate and gas injection are of the techniquesunder the study to prevent or decrease the condensate saturation produced in the reservoir. This article examines change in Production flowrate and gas injection in condensate production and condensate saturation in reservoir

نویسندگان

Mohammad Riyahin

(Department of Petroleum Engineering, Firoozabad Branch, Islamic Azad University, firoozabad, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :