Pushing the limits in hydraulic fracture design with a P-3D model and non-Darcy flow effect consideration

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 741

فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICOGPP03_281

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

With the onset of hydraulic fracturing an applicable development method for production from gas wells- high or low permeable- was introduced, with fracture parameters optimization being the mainstay for the hydraulic fracturing design. In this study, a method for optimizing fracture parameters is introduced based on the Unified Fracturing Design (UFD. Thereafter, the maximum dimensionless productivity index and optimal dimensionless fracture flow conductivity are calculated for a certain proppant number in a fractured well. The calculations are followed by determining the corresponding dimensionless productivity index, the optimal half-length and the width of the fracture.Assuming a constant fracture height, the calculations become easy and a 2D fracture model would suffice to design it. But, it is not constant throughout the fracture and varies with the net pressure exerted on the fracture medium. All calculations above are carried out taking into account the effect of non-Darcy flow in the fracture with not only the fracture width and length, but also the fracture height being optimized. Considering these two issues, the effects of design parameters on the production from a hydraulically fractured well are investigated

نویسندگان

m ameri

Assistant Professor at Department of Petroleum Engineering, Amirkabir University of technology, Tehran, Iran

m asadi

M.Sc. student of petroleum engineering at Amirkabir University of Technology, Tehran, Iran

a rahimbakhsh

M.Sc. student of petroleum engineering at Amirkabir University of Technology,Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • . Economides, _ Oligney, R.E., Vako, P.P., 2002. Unified Fracture ...
  • . McGuire, W., Sikora, V. 1960). The Effect of Vertical ...
  • . Prats, M., 1961. Effect of vertical fractures On reservoir ...
  • . Diyashev, I.R., Economides, M.J.. 2005. A General Approach to ...
  • . Romero, D.J., Valko, P.P., Economides, M.J., 2002. The Optimization ...
  • . Lopez -Hernandez, H.D., Valko, P.P., Pham, T.T., 2004. Optimum ...
  • . Wei, Y., Economides, M.J., 2005. Transverse Hydraulic Fractures from ...
  • . Bhatttcharya, S., Nikolaou, M.. and Economides, M. j, 2012. ...
  • . Daal, J.A., Economides, M.J., 2006. Optimization of Hydraulically Fractured ...
  • . Sabaev, V.V., Wolcott, D.S., Mach, J.M., Antipina, D.V., Haidar, ...
  • . Demarchos, A.S., Chomatas, A.S., Economides, M.J., 200)4. Pushing the ...
  • . Rice, J.R. 1968. Fracture An Advanced of Treatise. Mathematicat ...
  • . Simonson, E.R., Abou-Sayed, A.S. and Clifton, R.J. 1978. Containment ...
  • . Perkins, T. K. and kern, L. R. (1961). :Width ...
  • . Khristianovich, S.A., and Zheltov, Y .P.: Theoretical principles of ...
  • _ _ _ _ _ _ (NPV) in the ...
  • . Dietz, D.N., August, 1965. Determination of average reservoir pressure ...
  • . Cooke Jr., C.E., October 1993. Conductivity of proppants in ...
  • _ _ 1957. Analysis of Strese and Strains near the ...
  • نمایش کامل مراجع