The study of turbulence models effects in simulaton of power performance of horizontal axis wind turbine

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 611

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IEAC03_024

تاریخ نمایه سازی: 25 آذر 1396

چکیده مقاله:

This paper numerically investigates two important parameters including Turbulence Models and Turbulence Intensity (TI) which highly affect the power coefficient of Horizontal Axis Wind Turbines (HAWT). Firstly, a Horizontal Axis Wind Turbine was modelled in CATIA. Secondly, the geometry was transferred to GAMBIT for meshing. Finally, the meshed geometry was transferred to CFX for simulation. The results were obtained from three different Tip Speed Ratios (TSR) and two diversified Turbulence Intensities (TI). Three different mesh resolutions including Fine, medium and coarse were used for the simulations. The Shear Stress Transport (SST) and k- were employed as the turbulence models. The results obtained from CFX were compared with experimental data. The differences between experimental data and simulated data can be observed according to the article graphs. Moreover, a grid study was performed in order to understand the optimum number of nodes.

کلیدواژه ها:

Mesh resolution ، Turbulence Intensity (TI) ، Horizontal Axis Wind Turbine (HAWT) ، power coefficient ، Tip Speed Ratio (TSR) ، Shear stress Transport (SST)

نویسندگان

Mahdi Moghimi

Assistant Professor at department of Mechanical Engineering Iran University of Science and Technology Tehran, Iran

Seyed Mohammad Hossein Mortazavi Nooghi

Department of Mechanical Engineering Iran University of Science and Technology

Hamidreza Aminianfard Moghaddam

Department of Mechanical Engineering Iran University of Science and Technology