On the preparation and characterization of novel Al/CMA nanocomposite via powder technology
محل انتشار: پنجمین کنفرانس بین المللی آلومینیوم ایران
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 484
نسخه کامل این مقاله ارائه نشده است و در دسترس نمی باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC05_012
تاریخ نمایه سازی: 27 تیر 1398
چکیده مقاله:
Complex metallic alloys (CMAs) are new possible candidates for reinforcing agents with excellent technological potential. The β-Al3Mg2 belongs to this new category of intermetallics. β-Al3Mg2 nano particles were synthesized by mechanical milling (MM) of Pre-alloyed CMA intermetallic ingot in attritor ball mill. Then differentamont of CMAs nanoparticles varied from 0 to 20% (by weight) were added to Aluminum matrix powder.Consolidated samples were prepared by hot pressing of blended composite powder. Phase and Microstructural characterization were performed applying X-ray diffractometer (XRD), optical microscope (OM) and scanning electronmicroscope (SEM) equipped with energy dispersive X-ray (EDX). The results confirmed the formation of uniform distributed reinforcement in nanocomposites with finer microstructure by addition of CMA reinforcement.
کلیدواژه ها:
نویسندگان
Morteza Ghadimi
Young Researchers and Elites Club, Science and Research Branch, Islamic Azad University, Tehran, Iran
Roudabeh Sadat Moazeni-Pourasil
Faculty of Chemistry, Kharazmi University, Tehran, Iran