study onpossibility of friction stir welding of dissimilar and non uni thickness materials aluminum alloy to copper
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,171
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_025
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
friction stir welding FSW is a relatively new method in solid state welding uses a non-consumable rotating tool for creating frictional heat and plastic deformation in the weld zone this project concentrates possibility of friction stir welding in form of butt joint on the dissimilar and non uni-thichness metals copper to aluminum 5000 series the rotational speed and travel speed of the tool was in the range of 630-1600 rpm and 25-150 mm/min.after acquired the optimum welding parameters the microstructure and hardness of specimens was studied .the flow of material in the stirred zone SZ showed a swirl -vortex structure because of stirred dissimilar materials microstructure investigation shows fine grains near the weld zone due to mechanical working
کلیدواژه ها:
نویسندگان
m rezaee ardani
ferdowsi university of mashhad