interfacial microstructure and properties of SiC/SiC joint brazed with Ag-Cu-Ti alloy
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,291
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_039
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
SiC CERAMIC WAS JOINED TO ITSELF USING ACTIVE brazing alloys like Ti in shape of sheet filler of Ag-cu and Ti-6AI -4V. This operation is occurred in an inert gas furnace interfacial microstructure studied with scanning electron microscopy and X-ray diffraction variation of electrical specific resistance measured by 4 pin astute multimeter and strength of these joint was measured by fracture shear loading this joint is happened at 900 c and upper temperature with 90 minutes and upper time electrical specific resistance goes upper with joint in low temperature & time but this variation is very little . the microstructure showed and excellent bonding at the interfaces. the data showed also that the joining of the SiC decreases with increasing temperature and time.
کلیدواژه ها:
نویسندگان
a ghazi daryani
department of material science research &science branch IAU tehran
a.h kokabi
sharif university
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :