the effect of process parameters on the surface quality of FSPed AZ91 magnesium alloy
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,007
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_067
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
friction stir processing which is based on friction stir welding is a solid state processing to improve microstructure and mechanical properties of sheets and as-cast metals. By using this technique it is possible to produce a composite layer on various metals one of the important problems in friction stir processing of AZ91 magnesium alloy is the sticking of the magnesium to the tool and the creation of cracks and brittle fracture inthe present work the effect of the main process parameters rottational speed transverse speed tool penetration depth and tilt angle ont he developed surface quality has been investigated results show that by increasing the rotational speed the maximum transverse speed to produce a defect free specimen without crack and tunnelling cavity increases the paper describes an optimum penetration depth while preventing sticking of magnesium to the tool and producing a defect free specimen.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :