Influence of simultaneous addition of Al-5Ti-1B and Al-10Ca on the structure and mechanical properties of A356 alloy

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,341

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES06_233

تاریخ نمایه سازی: 8 بهمن 1391

چکیده مقاله:

Combinations of Al-5Ti-1B and Al-10Ca master alloys have been used to study their effects on the structure and mechanical properties of cast A356 alloy. Al-5Ti-1B and Al-10Ca master alloys were added to the moltenA356 alloy to produce different levels of Ti (0.01, 0.05 and 0.1) and Ca (0.01, 0.03 and 0.05) in the castings. From macrostructure studies the optimum amount of Ti was found to be 0.01%. The addition of Ca showed that Si crystals in the microstructure of thealloy changes from acicular to refined morphology to some extent. Significant improvement on tensile properties obtained from simultaneous addition of grain refinement and modification. The results showed that as the mount of Ca increases (up 0.05%Ca), UTS value increases from 210 MPa to 310 MPa.

نویسندگان

Amir Hossein Pourmonshi

Department of Material Science Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran

Massoud Emamy

School of Material and Metallurgy Engineering, University of Tehran, Tehran, Iran

Seyed Ehsan Vaziri Yeganeh

Imam Khomeini International University, Qazvin, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Prasada Rao A K., Das K., Murty B. S and ...
  • Kori A., Murty B. S and Chakraborty K., Development of ...
  • McCartney D. G., Grain refining of aluminum and its alloys ...
  • Kearney A., Aluminum Foundry Products, Metals Handbook, 9th ed. aluminum ...
  • Ganger D. A and Elliot R., Solidification of eutectic alloys, ...
  • Closset B. M and Gruzlesk J., The treatment of liquid ...
  • LIAO H, SUN Y and SUN G., Correlation between mechanical ...
  • Lu S. Z and Hellawell A.. Growth mechanisms of silicon ...
  • Atxaga G, Pelayo A and Irisarri A _ Effect of ...
  • Hanna M. D, Lu S. Z and Hellawel A.. Modification ...
  • Kori S. K, Murty B. S and Chakraborty M., Development ...
  • Wang E. R, Hui X. D, Wang S. S, Zhao ...
  • نمایش کامل مراجع