OPTIMIZATION OF COPPER RECOVERY FROM ANODE SLIMES

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,312

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES06_644

تاریخ نمایه سازی: 8 بهمن 1391

چکیده مقاله:

Copper recovery from anode slimes was studied by using sulfate digestion method and recovered by changing pH.D-optimal design was employed for experimental design and analysis of the results. The combined effect of temperature and L/S was investigated and the optimum values of these factors were found to be at a solution L/S of 1.6 and temperature of 211.5 0C that resulted in 93% of the copper recovery while acid addition did not have any significant influence on the recovery of copper. The obtained model is highly significant

کلیدواژه ها:

نویسندگان

Fazlolah Ghazali Jahromi

Department of Metallurgy and Materials Engineering University of Tehran, Tehran, Iran,

Fereshteh Rashchi

Associate Professor, Department of Metallurgy and Materials Engineering University of Tehran

Mojtaba Saba

Department of Metallurgy and Materials Engineering University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • O. Jarvinen, P. Taskinen, O. Hyvarine, H. Virtanen, L. Lindroos, ...
  • W.G. Davenport, M. King, M. Schlensinger, Extractive metallurgy of copper, ...
  • A.M. Amer, Processing of copper anodic-slimes for extraction of valuable ...
  • _ R. Lide, CRC Handbook of Chemistry and Physics, 2007, ...
  • R.H. Myers, D.C. Montgomery, Response Surface Methodology: Process and product ...
  • F. Amiri, S.M. Mousavi, and S. Yaghmaei, Enhancement of bioleaching ...
  • نمایش کامل مراجع