The Effect of Repetitive Corrugation and Straightening by Rolling (RCSR) Process on the Microstructure of 304 stainless steel

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 404

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES10_253

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

The current research is an attempt to study the effect of a novel severe plastic deformation technique called repetitive corrugation and straightening by rolling (RCSR) and subsequent annealing on the microstructure and mechanical properties of AISI type 304 austenitic stainless steel. In this study, RCSR process was carried out at 200 °C in order to avoid the formation of martensite phase when a high density of dislocations was introduced into the austenite phase. Thereafter, annealing treatment was applied to refine the microstructure of 304 stainless steel. The specimens were examined by optical microscopy (OM), tensile and micro-hardness tests. The results indicate that by increasing the cycles of RCSR process, more mechanical twins are induced, the hardness and in particular, the yield stress of specimens have been increased.

نویسندگان

Shima Ahmadzadeh

M.Sc. Student, Metallurgy and Materials Engineering

Mahmoud Nili-Ahmadabadi

Professor, Metallurgy and Materials Engineering School of Metallurgy and Materials, College of Engineering, University of Tehran, Tehran, Iran

Hassan Shirazi

PhD, Metallurgy and Materials Engineering School of Metallurgy and Materials, College of Engineering, University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • پجمین کنفرنس بین‌امللی مهندسی _ ومتلوژی‌ودهمین کنفرنس مشترک‌نجمن مهندسین متلوژی‌یرک ...
  • X.H. Chen, J. Lu, L. Lu and K. Lu, ،"Tensile ...
  • Y. Ma, J.E. Jin and Y.K Lee, _ repetitive thermo ...
  • A. Rezaee, A. Najafizadeh, A. Kermanpur and M. Moallemi, _ ...
  • M. Moallemi, A. Kermanpur, A. Najafizadeh, A. Rezaee and l ...
  • C.Y. Lee, C.S. Yoo, A. Kermanpur and Y.K. Lee, _ ...
  • R.Z. Valier and T.G. Langdon, "Principles of equal-channel angular pressing ...
  • A.P. Zhilyaev and T.G. Langdon, ،Using high-pressure torsion for metal ...
  • N. Tsuji, Y. Saito, _ Lee, and Y. Minamino, _ ...
  • S.C. Yoon, A. Krishnaiah, U. Chakkingal, and H.S. Kim, :Severe ...
  • J. Lee, and J. Park, ،"Numerical and experimental investigations of ...
  • A. Mirsepasi, M. Nil i-Ahmadabad _ M. Habibi-Parsa, H. Ghasemi-Nane ...
  • , 9 Nov. 2016 Shiraz University 5. References ...
  • M. R. Rocha and C. A. S. Olivier, :"Evaluation of ...
  • L. Mosecker, D.T. Pierce, A. Schwedt, M. B _ ighmohamadi, ...
  • S. Mirab, M. Nili -Ahmadabadi, A. Khajezade, M. Abshirini, M. ...
  • J. Talonen and H Hanninen, _ of shear bands and ...
  • G.B. Olson and M Cohen, _ general mechanism of martensitic ...
  • S. Allain, J.P. Chateau and O Bouaziz, "A physical model ...
  • Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang and L. ...
  • M. J. Whelan, P. B. Hirsch, R. W. Horne, W. ...
  • L.E. Murr, _ 'Stacking-fault anomalies and the measuremet of stacking-fault ...
  • F.J. Humphreys and M. Hatherly, ، _ Re crystallization and ...
  • A. Hedayati, A. Najafizadeh, A. Kermanpur, F. Forouzan, _ effect ...
  • , 9 Nov. 2016 Shiraz University ...
  • نمایش کامل مراجع