Investigating the Effect of Severe Plastic Deformation (SPD) on the Wettability Behavior of Superhydrophobic Aluminum Alloy
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 532
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES12_100
تاریخ نمایه سازی: 11 اردیبهشت 1398
چکیده مقاله:
In the present study, simple and low-cost method has been suggested to create micro-nanostructure superhydrophobic on severe plastic deformed samples of aluminum alloy. Aluminum alloysamples were processed 0, 1, and passes of TCP process. The metallographic analyze wasperformed on severe plastic deformed samples after SPD process. It was found that increasing thenumber of passes reduces the intermetallic particles in the structure of the matrix. The water contactangles were measured. The water contact angle for all samples was at least 165°. It was concludedthat, according to the Cassie-Baxter theory, part of the superhydrophobic surface is in contact withwater droplets, is formed from the air.
کلیدواژه ها:
نویسندگان
Mohammad Reza Attar
M.Sc. Student of Identification and Selection of Materials
Ali Gholamzadeh
M.Sc. Student of Corrosion Engineering, Department of Materials Engineering, Ferdowsi University of Mashhad,Mashhad, Iran
Mohammad Hassan Farshidi
Assistant Professor, Department of Materials Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Ali Davoodi
Associate Professor, Department of Materials Engineering, Ferdowsi University of Mashhad, Mashhad, Iran