LIMIT LOAD ANALYSIS OF COMPONENTS WITH MULTIPLE CRACKS
محل انتشار: سیزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,851
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME13_661
تاریخ نمایه سازی: 21 اسفند 1385
چکیده مقاله:
Elastic modulus adjustment procedures (EMAP) have been employed to determine limit loads fracture mechanic components including cracks. On the basis of linear elastic Finite Element Analysis (FEA) with non-hardening elastic properties, i.e., by specifying spatial variations in the
elastic modulus, numerous set of statically admissible and kinematically admissible distributions can be generated, and both lower and upper bounds on limit loads can be obtained. This paper demonstrates the application of EMAP in the context of limit load determination of cracked
components. The procedure is initially applied to some practical components with cracks to verify their effectiveness in analyzing crack geometries. The analysis is then directed to pipe geometries containing multiple cracks representing typical stress corrosion colonies. The limit load results are then compared to traditional nonlinear finite element analysis results or analytical solutions.
کلیدواژه ها:
EMAP – Multiple cracks – FEA- Lower bound - Upper bound
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :