3D finite element heat transfer modeling of powder binding via moving plasma arc in Selective Electrical Discharge Sintering (SEDS)
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 3,102
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME16_759
تاریخ نمایه سازی: 20 آبان 1386
چکیده مقاله:
Transient heat transfer in the powder bed in selective electrical discharge sintering (SEDS) during the binding stage is investigated numerically through the finite-element method. In SEDS, the spread powder layer is subjected to the concentrated thermal radiational energy of the plasma arc that causes the powder particles to bind to the adjacent particles according to liquid phase (LPS) sintering mechanism. The results of
the 3D FE model determine the maximum temperature at the top surface of the powder bed as well as sintering depth for different process parameters such as plasma scan speed.
کلیدواژه ها:
نویسندگان
Yaser Shanjani
Dept of Mechanical Engineering University of Waterloo
Seyfolah Saedodin
Dept of Mechanical Engineering Iran University of Science and Technology
Ehsan Toyserkani
Dept of Mechanical Engineering University of Waterloo
Amin Mirahmadi
Dept of Mechanical Engineering, Iran University of Science and Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :