Bursting Failure Prediction in Tube Hydroforming Process by using Ductile Fracture Criterion Combined With FEM

سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,081

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME16_817

تاریخ نمایه سازی: 20 آبان 1386

چکیده مقاله:

In this paper, primarily the possibility of the application of Oyane’s ductile fracture criterion in prediction of bursting failure in tube hydroforming process under combined internal pressure and independent axial feeding is examined. The histories and distributions of stress and strain are calculated by means of finite element method using Oyane’s ductile fracture integral, then the position where the fracture initiates is located and consequently the forming limit is identified. The numerically obtained results are confirmed by on hand experimental results of series of tube bulging tests. Consequently, it is shown that this ductile fracture criterion provides a better method to satisfy the increasingly practical demand for computer aided formability evaluation system in hydroforming process. Then, the region of fracture initiation and the forming limit in hydroforming of a cylindrical tube into a rectangular tube under different forming conditions are predicted by this criterion in this study for the first time. The effects of different parameters such as friction, axial feeding and internal pressure on bursting failure position are studied.

نویسندگان

Kargarnovin

Sharif University of Technology, Tehran, Iran

Ashouri

Sharif University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Smith L.M., Ganeshmurthy S., Alladi K., 2003, _ Double-sided high-pressure ...
  • Lei L.P., Kang B.S. and Kang S.J., 2001, "Prediction of ...
  • نمایش کامل مراجع