Studying of the Effective Parameters on Enhanced Heavy Oil Recovery by steam injection
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 746
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME22_353
تاریخ نمایه سازی: 14 مرداد 1393
چکیده مقاله:
High viscosity of some crude oil makes difficult to recover with primary or secondary production methods. Therefore, thermal oil recovery techniques are recommended for the Enhanced Oil Recovery (EOR) of heavy oil. In this experimental study, steam injection was used to investigate the effectiveness parameters on heavy oil production rate. The result is shown that, by increasing pressure, steam reaches the breakthrough point sooner, but recovery decreases. If the oils are a little different in viscosity, recovery in the light oil is more than that in heavy oil. Also in the highly viscous oils and light oils, recovery in the heavy oil is much higher than in light oil.
کلیدواژه ها:
نویسندگان
Reza Cheraghi Kootiani
Department of Petroleum Engineering, Faculty of Petroleum, University Technology Malaysia
Ariffin Bin Samsuri
Department of Petroleum Engineering, Faculty of Petroleum, University Technology Malaysia
Hasan Cheraghi Kootiani
Free Zone Arvand, Abadan, Khuzestan, Iran
Mohammad Hossein Baghbanian
Azad University of Dezfool, Khuzestan, Iran