Geometrical Characterization of a Micro-Channel in Electro-Wetting Application
محل انتشار: بیست و پنجمین همایش سالانه مهندسی مکانیک
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 421
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME25_146
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
This article investigates the effect of a micro-channel widthand height on the threshold voltage for the movement of aliquid metal droplet in the electrowetting on dielectric(EWOD) phenomenon. For this purpose, a PCB (printedcircuit board) board composed of an electrode array with acrescent shape is used. The micro-channel is covered fromthe top with a glass which is made conductive of electricityusing the FTO technique. The results show that increasingthe height and width of the micro-channel reduces thethreshold voltage. The same trend is observed using anelectrode curved with an opposite curvature. It is found thatfor an electrode shape curved with a curvature in the samedirection of the droplet meniscus, the threshold voltage islower.
کلیدواژه ها:
Microchannel - Threshold Voltage - Droplet –Electrowetting
نویسندگان
Mehrdad Shokoohi
Graduate Student of Mechanical Engineering, Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Mohammad Khorsand Ahmadi
Graduate Student of Mechanical Engineering, Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Mohammad Passandideh-Fard
Professor, Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran