An Investigation on the Microstructure of CNT-Reinforced PP/PC Nanocomposites

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 516

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISPST11_506

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

Polypropylene(PP)/Polycarbonate(PC) nanocomposites reinforced with carbon nanotubes (CNTs) were prepared using laboratory internal mixer at 255°C in order to investigate CNT dispersion, mechanical and structural properties of the prepared nanocomposites at different blend composition ratios. Results showed that upon the addition of CNT to PP/PC blend samples the failure mechanism changes from ductile to brittle behavior. Studying the fracture surface of nanocomposite samples through scanning electron microscope revealed some layers developed on the surface indicating heterogeneity in the nanoclay dispersion

کلیدواژه ها:

PP-PC- CNT- Nanocomposite- Microstructure

نویسندگان

Shirin Shokoohi

Polymer Science and Technology Department, Research Institute of Petroleum Industry, P.O. Box 14115-143, Tehran, Iran.

Meghdad Ardestani

Department of Polymer Engineering, Tehran-South Branch, Azad University, Tehran, Iran.

Ghasem Naderi

Department of Rubber, Iran Polymer and Petrochemical Institute, P.O. Box 14565-115, Tehran, Iran.