Vibration based Assessment of Tool Wear in Hard Turning using Wavelet Packet Transform and Neural Networks

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 264

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-12-2_002

تاریخ نمایه سازی: 27 فروردین 1399

چکیده مقاله:

Demanding high dimensional accuracy of finished work pieces and reducing the scrap and production cost, call for devising reliable tool condition monitoring system in machining processes. In this paper, a tool wear monitoring system for tool state evaluation during hard turning of AISI D2 is proposed. The method is based on the use of wavelet packet transform for extracting features from vibration signals, followed by neural network for associating the root mean square values of extracted features with tool flank wear values of the cutting tool. From the result of performed experiments, coefficient of determination and root mean square error for the proposed tool wear monitoring system were found to be 99% and 0.0104 respectively. The experimental results show that wavelet packet transform of vibration signals obtained from the cutting tool has high accuracy in tool wear monitoring. Furthermore, the proposed neural network has the acceptable ability in generalizing the system characteristics by predicting values close to the actual measured ones even for the cutting conditions not encountered in the training stage.

نویسندگان

vahid pourmostaghimi

Department of Mechanical Engineering, University of Tabriz, Iran

Mohammad Zadshakoyan

Department of Mechanical Engineering, University of Tabriz, Iran

Morteza Homayon Sadeghi

Department of Mechanical Engineering, University of Tabriz, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Azizi, M. W., Belhadi, S., Athmane Yallese, M., Mabrouki, T., ...
  • Kong, D., Chen, Y., Li, N., and Tan, S., Tool ...
  • Dutta, S., Pal, S. K., and Sen, R., Progressive Tool ...
  • Jianfeng, L., Yongqing, Z., Fangrong, C., Zhiren, T., and Yao, ...
  • Jetley, S. K., A New Radiometric Method of Measuring Drill ...
  • Sadílek, M., Kratochvíl, J., Petrů, J., Čep, R., Zlámal, T., ...
  • Su, J. C., Huang, C. K., and Tarng, Y. S., ...
  • Ghosh, N, Ravi, Y. B., Patra, A., Mukhopadhyay, S., Paul, ...
  • Abu-Mahfouz, I., Drilling Wear Detection and Classification Using Vibration Signals ...
  • Bhaskaran, J., Murugan, M., Balashanmugam, N., and Chellamalai, M., Monitoring ...
  • D Errico, G. E., An Adaptive System for Turning Process ...
  • Alonso, F. J., Salgado, D. R., Analysis of the Structure ...
  • Ebersbach, S., Peng, Z., Expert System Development for Vibration Analysis ...
  • Chen, B., Chen, X., Li, B., He, Z., Cao, H., ...
  • Bhuiyan, M. S. H., Choudhury, I. A., and Dahari, M., ...
  • Tjepkema, D., Van Dijk, J., and Soemers, H. M. J. ...
  • Segreto, T., Simeone, A., and Teti, R., Multiple Sensor Monitoring ...
  • Salgado, D. R., Cambero, I., Herrera Olivenza, J. M., García ...
  • Painuli, S., Elangovan, M., and Sugumaran, V., Tool Condition Monitoring ...
  • Aghdam, B. H., Vahdati, M., and Sadeghi, M. H., Vibration-Based ...
  • Wang, J., Xie, J., Zhao, R., Zhang, L., and Duan, ...
  • Silva, R. G., Reuben, R. L., Baker, K. J., and ...
  • Siddhpura, A., Paurobally, R., A Review of Flank Wear Prediction ...
  • Liu, B., Ling, S. F., and Meng, Q., Machinery Diagnosis ...
  • Wu, Y., Du, R., Feature Extraction and Assessment Using Wavelet ...
  • Xiaoli, L., Zhejun, Y., Tool Wear Monitoring with Wavelet Packet ...
  • Mehrabi, M. G., Kannatey-Asibu Jr, E., Hidden Markov Model-Based Tool ...
  • Scheffer, C, Kratz, H., Heyns, P. S., and Klocke, F., ...
  • Velayudham, A, Krishnamurthy, R., and Soundarapandian, T., Acoustic Emission Based ...
  • Zhu, K., San Wong, Y., and Soon Hong, G., Wavelet ...
  • Chen, H., Huang, S., Li, D., and Fu, P., Turning ...
  • Lee, S., Tool Condition Monitoring System in Turning Operation Utilizing ...
  • Mikołajczyk, T., Nowicki, K., Kłodowski, A., and Yu Pimenov, D., ...
  • Teshima, T., Shibasaka, T., Takuma, M., Yamamoto, A., and Iwata, ...
  • Kaya, B., Oysu, C., and Ertunc, H. M., Force-Torque Based ...
  • Yaqub, M. F., Gondal, I., and Kamruzzaman, J., Multi-Step Support ...
  • Karam, S., Teti, R., Wavelet Transform Feature Extraction for Chip ...
  • Jemielniak, K., Kossakowska, J., Tool Wear Monitoring Based on Wavelet ...
  • Fang, N., Srinivasa Pai, P., and Mosquea, S., Effect of ...
  • Davim, J. P., and Figueira, L., Comparative Evaluation of Conventional ...
  • نمایش کامل مراجع