Effect of Aerodynamic Blade Change of Two-Stage Axial Subsonic Turbine on Design Point

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 307

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-12-2_007

تاریخ نمایه سازی: 27 فروردین 1399

چکیده مقاله:

In this research for reducing the effect of losses and increasing the efficiency, the bowing in the rotor and stator blades is used. In one mode rotor blades are curved and in other one, stator blades are curved. The amount of rotor loss, due to changes in the thickness of the trailing edge and operating rotational speed, have been investigated. To confirm the accuracy of the results, a turbine stage whose experimental results are available is modeled and numerical results have been compared with experimental results that indicate acceptable compliance. The turbulence model k-w-SST is used to solve turbulent flow. The positive bowing, creates a pressure gradient from the two ends of the blade towards the center of the blade, which leads to the directing of the secondary flows toward the center of the blade. This reduces the losses in the two ends of the blade and increases the loss in the middle part of the blade. Increasing the thickness of the trailing edge, as well as increasing the turbine’s operating rotational speed, will increase the loss. The curved rotor increases the efficiency and mass flow and power by 0.4% and 0.5% and 0.8% respectively and the curved nozzle reduces the efficiency and power by 0.3% and 4.9% but increases the mass flow by 0.2%. It also increases the thickness of the trailing edge of the first rotor from 0.2mm to 0.9mm at 24000 rotational speed and increases the total loss by about 35%.

نویسندگان

Mahmood Adami

Department of Mechanical Engineering, Malek Ashtar University of Technology, Iran

Behrooz Shahriari

Department of Mechanical Engineering, Malek Ashtar University of Technology, Iran

Ali Zamani Gharaghoushi

Department of Mechanical Engineering, Malek Ashtar University of Technology, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Karrabi,H., Rezasoltani, M., The Effect of Blade Lean, Twist and ...
  • M. Deich, M., Gubarev, A., Filipov, G., and Wang, Z. ...
  • Breugelmans, F. A. H., Carels, Y., and Demuth, M., Influence ...
  • Shang, E., Wang, Z. Q., and Su, J. X., The ...
  • Weingold, H. D., Neubert, R. J., Behlke, R. F., and ...
  • Fischer, A., Riess, W., and Seume, J. R., Performance of ...
  • Tan, C., Yamamoto, A., Mizuki, S., and Chen, H., Influences ...
  • Tan, C., Yamamoto, A., Chen, H., and Mizuki, S., FlowField ...
  • Tan, C Zhang, H. Chen, H., and Yamamoto, A., Blade ...
  • Schobeiri, M. T., Suryanarayanan, A., Jermann, C., and Neuenschwander, T., ...
  • Hassan Vand, M., Wang, S., Numerical Study of the Effects ...
  • L. Chen, L., Liu, X. J., Yang, A. L., and ...
  • Koch,L. S. C., Loss Sources and Magnitude in Axial Flow ...
  • Wisler, D. C., Loss Reduction in Axial-Flow Compressors Through Low-Speed ...
  • Zheng, X., Li, Z., Blade-End Treatment to Improve the Performance ...
  • Ennil, A. B., Al-Dadah, R., Mahmoud, S., Rahbar, K., and ...
  • Freeman,C., Effect of Tip Clearance Flow on Compressor Stability and ...
  • Bini, R., Colombo, D., Large Multistage Axial Turbines, Energy Procedia, ...
  • Lindquist Whitacker, L. H., Tomita, J. T., and Bringhenti, C., ...
  • Majumdar, S., Role of Underrelaxation in Momentum Interpolation for Calculation ...
  • Chima, R., Liou, M. S., Comparison of the AUSM+ and ...
  • Groschup, G., Strömungstechnische Untersuchung einer Axialturbinenstufe im Vergleich Zum Verhalten ...
  • Zhongqi, L. S. W., Wenyuan, X., Aerodynamic Calculation of Turbine ...
  • Wang, S., Wang, Z., and Feng, G., Numerical Simulation of ...
  • نمایش کامل مراجع