MODELING AND SIMULATION OF NATURAL CONVECTION HEAT TRANSFER PROCESS IN POROUS AND NON-POROUS MEDIA
محل انتشار: مجله تحقیقات کاربردی، دوره: 2، شماره: 4
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 410
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ARJ-2-4_006
تاریخ نمایه سازی: 2 دی 1395
چکیده مقاله:
This work presents a 2-D numerical solution in order to investigate thenatural convection heat transfer in porous and non-porous media. In thispaper, water was used as a fluid passes through the porous and non-porousmedia. The magnitude of fluid flow rate, fluid temperature gradient in theboundary area and pressure changes in porous and non-porous media weresimulated and were validated with literature data. In this article, meshingwas done in order to increase the accuracy and decrease the computationalerror. In the modeling, it was assumed that the fluid around the boundariesof porous and non-porous media is stagnant. According to modeling andsimulation, use of porous media has caused the significant increase ofvelocity (3.810-8 cm/s in non-porous media and 5.0810-5 cm/s in porousmedia). Also the use of porous media caused increase of convective heattransfer 1.7 times more than non-porous media. There was a very goodagreement between simulation results and literature data with ARE(Average Rate of Error) maximum 10.2%.
کلیدواژه ها:
نویسندگان
Ali Taghvaie Nakhjiri
Department of Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Majid Hasanzadehan Roudsari
Department of Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran