Investigating methods in data preparation for stochastic rainfall modeling: A case study for Kermanshah synoptic station rainfall data, Iran
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 373
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ARWW-6-1_005
تاریخ نمایه سازی: 24 شهریور 1398
چکیده مقاله:
Given the climate changes, achieving rainfall forecast is of high importance and facing such challenges affected markedly in vast areas of societies. Accordingly, numerous nonlinear and linear methods have been developed. Most hydrological phenomena like rainfall are consisted of both linear and nonlinear parts. Modeling such phenomenon with stochastic methods like seasonal auto regressive moving average model (SARIMA), which are linear, demands data preparation prior to modeling. In this study, by investigating different forms of data preparation methods, variations in stochastic modeling results are scrutinized. The pre-processing methods used are categorized in two parts, normalization and stationarzition of data. The rainfall series is initially normalized by 4 transforms, namely: Manly(Mn), John-Draper (JD), Yeo-Johnson (YJ) and Scaling (Sc). The series, then, are stationarized by differencing, standardization (Std) and spectral analysis (Sf). After achieving preferred results by numerous tests, the preprocessed data are then modeled by stochastic SARIMA model. With regards to error and model sufficiency indices and graphs results, the acceptable results, but not the best, was obtained by the Sc-Diff combination, with SARIMA (0,0,1) (3,0,3)12 model and coefficient of determination, 0.355, variance accounted for, 0.353, root mean square error, 0.313, scatter index, 1.030, mean absolute error, 21.355), corrected Akaike Information Criterion, 1227.03. The results revealed that concerning the severe fluctuations in data, a supplementary method, like hybridization with artificial intelligence (AI) methods, is needed to achieve preferable results.
کلیدواژه ها:
نویسندگان
Mohammad Zeynoddin
Department of Civil Engineering, Faculty of Engineering, Razi University, Kermanshah, Iran
Hossein Bonakdari
Department of Civil Engineering, Faculty of Engineering, Razi University, Kermanshah, Iran Environmental Research Center, Razi University, Kermanshah, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :