Developing off-design model of Yazd integrated solar combined cycle for analyzing environmental benefits of using solar energy instead of supplementary firing
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 462
فایل این مقاله در 20 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-6-4_007
تاریخ نمایه سازی: 12 خرداد 1398
چکیده مقاله:
An integrated solar combined cycle (ISCC) is analyzed at off-design operating conditions. Using the principles of thermodynamics heat and mass transfer a computer code is developed in FORTRAN programming language to simulate the system’s hourly performance under steady state conditions. Three scenarios are considered for the study. In the first one, only the combined cycle (CC) is studied. In the second scenario, two solar heat exchangers are added to the system (ISCC) to produce some extra steam fed to the steam turbine for more power production. In the third one, as that of the ISCC scenario, a supplementary firing is used instead of solar heat exchangers to produce the same power. The main performance parameters are calculated for the hourly variation of solar direct normal irradiation intensity (DNI) and ambient air temperature for analyzing environmental benefits of using solar energy instead of supplementary firing. Results show that the contribution of solar energy in the annual produced power by the ISCC scenario is 75.14 GWh, which is 2.1% of the whole. In addition, it is found that using solar energy leads to an annual reduction of 36.13 Kton in the produced CO2 and an annual fuel saving of 3.76 ton.
کلیدواژه ها:
Integrated Solar Combined Cycle ، Solar Energy ، Off-Design Model ، Supplementary Firing ، Environmental Benefits
نویسندگان
Bagher Shahbazi
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Faramarz Talati
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
S.Mohammad Seyyed Mahmoudi
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Mortaza Yari
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :